Telrad Executive set with expanded display - Canceling call forwarding

Executive set with expanded display 27
NOTE
Instead of dialing the extension number, you may
also press a SPEED DIAL button (for both internal
and external calls) or MEMORY button (for internal
calls only) - or press [SPD/PROG] and a SPEED
DIAL memory code number. Calls are forwarded to
the contents of the MEMORY button or SPEED
DIAL memory code. If you later change the con-
tents of that SPEED DIAL memory code, calls are
forwarded to the new destination.The contents of a
SPEED DIAL memory code may not include a
flash signal. Changing the contents of a MEMORY
button does not affect the call forwarding destina-
tion.
6. Press {EXIT}.
To cancel call forwarding
• Follow the procedure above, but press {DELETE}
instead of pressing {EXIT}.