Telrad Executive set with expanded display - Abbreviated Dialing; Speed Dial; Programming speed dial

32 Executive set with expanded display
ABBREVIATED DIALING
This section describes several ways of abbreviating dial-
ing. Save/Repeat and Redial are described in Outside
Calls, above.
SPEED DIAL
Speed dial shortens the procedure of dialing outside num-
bers by using speed dial buttons and memory codes.
To speed dial an outside number
• Press the appropriate SPEED DIAL button,
or
Press [SPD] and dial the desired speed dial memory
code.
To program a speed dial memory code
or speed dial button
1. Press {PROGRAM}.
2. Do one of the following:
Press {SPEED DIAL} and dial a speed dial memory
code (two digits; e.g. 03),
or
Press the SPEED DIAL button to be programmed.
3. Dial an outside line code followed by the number you
want to store.
4. Press {SAVE}.
5. Press [SPKR].
NOTE
Pauses may be entered, where needed, in a speed
dial sequence by pressing {PAUSE}.