What to do if my Telstar LyoQuest Arctic-85 Plus Laboratory Equipment pump does not reach the vacuum pressure limit?
If your Telstar Laboratory Equipment vacuum pump isn't reaching the vacuum pressure limit, it might be due to a lack of oil. Check the oil level and add more until it reaches the appropriate quantity. Alternatively, the oil could be contaminated. In this case, empty the old oil and refill the pump with new oil.
Why my Telstar LyoQuest Arctic-85 Plus Laboratory Equipment vacuum pump does not start?
If the Telstar Laboratory Equipment vacuum pump does not start, several issues could be the cause. First, check the connection of the on/off switch located on the motor of the pump. Also, examine the electrical connection terminals of the pump and the corresponding circuit-breaker. The environmental temperature might be too high (over 35ºC), which could cause the circuit to break. Finally, the pump's starter protector may be blocked because the condenser isn't at the correct temperature. The minimum temperature to switch on the pump is: LQ-55
How to prevent abnormal heating of Telstar Laboratory Equipment pump?
If the Telstar Laboratory Equipment pump is heating abnormally, it may be due to poor ventilation or a high environmental temperature (above 35ºC). Try placing the pump in an area with better ventilation to resolve this issue.
What to do if I see mist leak from the emission channel of Telstar LyoQuest Arctic-85 Plus?
If you notice mist leaking from the emission channel of your Telstar Laboratory Equipment, it could be because the Gas-Ballast is opened too much; try closing it. Another possible reason is a leak somewhere in the system; try to locate the leak.
Provides specifications for vacuum pump, ice condenser, refrigerating unit, and equipment.
Instructions for receiving, inspecting, and unpacking the freeze-dryer unit.
Details the lyophilization process and its different modes.
Explains freeze-drying inside the condenser or the main chamber.
Steps to power on the equipment and access the main application screen.
Explains navigation and icons on the main operating screen.
Accessing and viewing active, muted, and corrected alarms.
Steps to create a new user account and assign privileges.
Procedures for cleaning and disinfecting the freeze-dryer unit.
Troubleshooting common issues with the vacuum pump operation.
General| Brand | Telstar |
|---|---|
| Model | LyoQuest Arctic-85 Plus |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
