Telstra ELITE User Manual v1.0 Page 19 of 20
Radiation from Electronic Devices
The USB Wireless modem is a transmitting device with similar output
power to a mobile phone. It uses an internal or external antenna to
connect to the mobile network. To get the best performance from your
device do not cover or shield the device in any way as this will lead to
increased output power. Always leave a clear space around the device to
allow the transmit and receive signals to propagate. It is not intended to
be used as a handheld or body worn device but SAR tests have been
successfully completed in accordance with the Australian regulatory
requirements.
Declaration of Conformity
We declare under our sole responsibility that the product(s) detailed in
this manual, and in combination with our accessories, conform with the
essential requirements of The Radio Communications Standard
(Electro-magnetic Radiation Human Exposure) 2003 and the Australian
Communications and Media Authority Section 376 of the
Telecommunications Act 1997.
The maximum SAR result recorded is 0.965 W/Kg in UMTS 2100 mode.
N14945
To Next Page
Loading...
