Need help?Do you have a question about the Telstra Gateway Max and is the answer not in the manual?
Connect the Telstra Gateway Max to your telephone socket and DSL port.
Connect power, turn on the Gateway, and wait for the Status LED to be solid green.
Connect to the Wi-Fi network using the Network Name and Key found on the security card.
Connect an Ethernet cable from the Gateway's LAN port to your computer's Ethernet port.
Follow steps to activate internet, enter broadband username and password.
Verify cabling and power, restart device if connection issues persist.
Retrieve lost broadband password via the Telstra website.
Check Gateway LED status and follow suggested actions for internet issues.
Access and manage Gateway settings like Wi-Fi, Parental Control, and broadband details.
General| WiFi Standards | 802.11ac |
|---|---|
| WiFi Bands | Dual-band (2.4GHz and 5GHz) |
| DOCSIS | DOCSIS 3.0 |
| VoIP | Yes |
| Modem Type | Cable |
| Weight | 500g |
| Ethernet Ports | 4 |
| USB Ports | 2 x USB 2.0 |
| WAN Port | 1 |
| Security | WPA2 |
To Next Page
