Telstra ELITE User Manual v1.0 Page 4 of 20
Insert the modem into your computer
The installation and management software is pre-loaded onto your
USB modem. Simply insert your modem into your computer and follow
the instructions on-screen.
You’ll be up and connected in about 5
minutes.
The USB modem is a Plug and Play device. Once inserted your system
will automatically detect the new hardware and start to install the
software. Be patient as it may take some time for your computer to
recognise the modem.
If nothing happens your system configuration may be preventing
Autorun.
Tips to resolve
Windows users: Double click the setup icon to start the software
installation
MAC users: Double-click the Telstra Pre-Paid Mobile Broadband icon
to start the install wizard
To Next Page
Loading...
