Telstra MF65 User Manual v1.0 Page 10 of 30
SETTINGS > NETWORK SELECTION:
• Network Selection is set to Automatic. You can change to 3G or 2G only.
• Press the Disconnect button to change this setting if required.
• If you make any changes, press Apply to save the change
• Press the Help icon to get in context tips.
• Normally there is no need to change these settings unless you change
service provider.
• The device is locked to Telstra. If you use a SIM card from another
provider you may not be able to connect to the network.
• Consult Telstra to obtain the unlock code for your device.
To Next Page
Loading...
