12 13
Receiving text messages
Your T1000C SMS can store up to 25 incoming text messages. When the memory is full,
the phone will display “SMS LIST FULL”. When you receive a text message you will hear
a short ring and the display will show “#SMS”. If you have connected the T1000C Power
Pack the light will be flashing.
To view received text messages
When you receive a text message the display will show “#SMS”.
1. Press Display shows “VIEW RECEIVED MESSAGES”.
2. Press Display shows the 1st message phone number and the 1st line of the
message.
3. Press to scroll through all received messages.
4. Press to select a message and press or
to read the full message and to see
the date and time of the message.
5. Press
to return the received messages list.
To reply to a text message
1. While viewing a received text message, press Display shows “REPLY?”.
2. Press Display shows “ENTER MESSAGE”. Enter your text message using
letters on keypad.
3. Press Display shows “SEND SMS?”.
4. Press Display shows “SENDING”.
Note: Display shows “SENT TO #” when text message is sent.
To forward a text message
10
1. While viewing a received text message, press
and scroll to “FORWARD SMS?” using
2. Press Display shows “ENTER NUMBER”.
3. Enter telephone number including area code, or press
and scroll to
required number and press to select.
4. Press Display shows “SEND SMS?”.
5. Press Display shows “SENDING”.
Note: Display show “ SENT TO #” when text message is sent.
To call the sender of a text message
While viewing a received text message, press and scroll to “CALL?” using
Press Display shows telephone number, then lift handset to call.
To store the sender’s telephone number in memory while viewing
a received text message:
1. Press then until display shows “VIEW RECEIVED MESSAGES”.
2. Press then to select text message number.
3. Press
to enter name using letters on keypad.
Note: The display shows “ENTER NAME” if there is an available memory.
4. Press
to save name and number in memory.
5. Press to return to standby mode or press or to view other received
text messages.
If the text message memory is full
When the text message memory is full, the phone will display the number of unviewed
text messages followed by “SMS:LIST FULL” e.g. “10 SMS:LIST FULL”.
If all the messages have been viewed but not deleted, the phone will display
“SMS:LIST FULL”.
You need to delete some received or sent messages to make room for new ones.
To delete individual text messages
1. Press and scroll to “VIEW RECEIVED MESSAGES”.
2. Press and scroll to the message you want to delete.
3. Press
Display shows “DELETE?”.
4. Press
again to delete message.
Note: Display moves to next message.
To delete all text messages
1. Press
Display will show “DELETE SMS OR MESSAGEBANK PIN”.
2. Press Display will show “DELETE ALL SENT SMS?”.
3. Press to “DELETE ALL UNSENT SMS?”
OR
Press
to “DELETE ALL RECEIVED SMS?”
OR
Press
to “DELETE ALL SMS?”.
4. Press or
to delete the select messages.
10. Charges apply for each message sent even if not received
To Next Page
Loading...
