14 15
SMS Service Centre numbers
The Telstra SMS Service Centre Send and Receive numbers are preset in your T1000C SMS
phone. If you accidentally change the Send or Receive numbers you will need to re-enter
them in order for your text messaging service to work.
Telstra’s Send SMS service number is 01983391.
Telstra Receive SMS service Centre number is 01983391.
The default terminal number is 0.
Changing the SMS service phone numbers
To change the SMS service number for sending text messages:
1. Press
Display will show “TERMINAL ID 0”.
2. Press Display will show “OUTGOING SMSC 01983391”.
3. Enter the new number.
4. Press
to store the new number.
To change the SMS service number for receiving text messages:
1. Press
Display will show “TERMINAL ID 0”.
2. Press Display will show “INCOMING SMSC 01983391”.
3. Enter the new number.
4. Press
to store the new number.
Note: SMS Service Centre phone numbers cannot be blank.
Sub-addressing of text messages
Telstra’s fixed text messaging service allows you to send text messages to a specific
phone when there is more than one phone connected to a telephone line. This may be
useful when you want to direct a message to a specific household member for privacy
reasons. Each phone can be given a different terminal number (from 1-9), text messages
can be sent to an individual phone by simply adding an extra digit to the phone number
corresponding to the terminal number of the particular phone. For example, if a text
message is sent to a fixed line with an additional digit “1” added to the telephone number,
only a phone set up with terminal number “1” on that line would receive the message.
The default terminal number for your phone is “0” and your phone will automatically
receive all text messages sent unless they have an additional sub-address digit added.
Changing the terminal number
To change the terminal number or sub-address for sending and receiving text messages:
1. Press
Display will show “TERMINAL ID 0”.
2. Enter the new terminal number (1 to 9).
3. Press
to store the new number.
Two or more SMS phones on the same line
If you have more than one SMS phone on the same line the phones may not operate
properly when receiving text messages. To overcome this you should change the terminal
number(s) so that only one phone has a terminal number of 0. The phone with a terminal
number of 0 will receive all text messages sent to your default address. The other phone(s)
will only receive text message sent to their specific sub-address. All phones will be able to
send text messages.
To Previous Page
Loading...
