28
BACK button
BACK button
BACK button
Clock Master
The phone can be set so that the modem or phone can be the clock master,
once set this will sync across all phones.
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3. Scroll to
Clock Master
and press
Select
.
4. Scroll or to
Base
or
Phone
and press
Select
.
5. Press to return to standby.
ECO plus
You can set the modem Eco+ mode via this menu, and the transmission power
method depends on the modem.
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3. Scroll to
ECO +
and press
Select
.
4. Scroll or to
De-activate
or
Activate
and press
Select
.
5. Press to return to standby.
Base version
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3. Scroll to
Base Version
and press
Select
.
4. The Firmware, EEPROM and Hardware Versions will be displayed.
5. Press to return to stand
by.
BACK button
When entering a PIN, the digits are shown as ****
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2.
DECT Settings
is highlighted. Press
Select
.
3.
Change PIN
is highlighted. Press
Select
.
4. Enter the old PIN and press
Ok
.
5. Enter the new PIN and press
Ok
.
6. Re-enter the new PIN and press
Save
.
7. Press to return to standby.
To Next Page
Loading...
