Telstra TSH-D - Line Selection and Help; Configuring Line Selection; Troubleshooting Common Issues; Resolving No Dial Tone

BACK button
31
Line selection
No dial tone
No display
When making calls you can pre set the line selection to auto, manual or individual
line selection.
1. Press
Menu , scroll to Advance Settings and press Select .
2. Scroll to
Line Selection and press Select .
3. Scroll or to select
Manual , Auto or the desired named line and press
Select .
4. Press to return to standby.
Default settings
Phonebook
Ring volume
tRing ones
Key tone
Out of range tone
Cradle tone
Phone name
Date & time
Alarm
Call list
Redial list
Receiver/speaker
Volume Line selection
Speed dial
Unchanged
3
1
On
Off
On
Supplied by the modem
01-01-2016, 00:00
Off
Modem dependent
Modem dependent
3
Auto
Unchanged
• Check that the modem is connected to the network properly.
• Check that the mains power is connected properly.
• Check that the phone is switched on and connected to the powerpoint.
• Reset the unit by disconnecting the mains power. Wait for around 15
seconds before connecting it again.
• Allow up to one minute for the phone and modem to synchronise.



