BACK button
BACK button
BACK button
BACK button
30
5. Scroll to
Line ID
and press
Select
.
6. The line ID is displayed.
7. Press
to return to standby.
Phone line settings
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2. Scroll to
Line Settings
and press
Select
.
3. Enter the PIN and press
Ok
.
4. Scroll or to the required line and press
Option
.
5. Scroll to
Attached Phone
and press
Select
.
6. Scroll or to the required phone.
7. Then scroll or to the check or uncheck the phone and press
Save
.
8. Press to return to standby.
Multi call mode
You can set the modem to single call or multiple calls mode.
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2. Scroll to
Line Settings
and press
Select
.
3. Enter the PIN and press
Ok
.
4. Scroll or to the required line and press
Option
.
5. Scroll to
Multi Call Mode
and press
Select
.
6. Scroll or to
Single
or
Multiple
and press
Select
.
7. Press to return to standby.
Intrusion call
When intrusion is set to allow, if a call is in progress, a second phone can
connect without being invited, eating a 3-way call.
1. Press
Menu
, scroll to
Advance
Settings
and press
Select
.
2. Scroll to
Line Settings
and press
Select
.
3. Enter the PIN and press
Ok
.
4. Scroll or to the required line and press
Option
.
5. Scroll to
Intrusion Call
and press
Select
.
6. Scroll or to
Not Allowed
or
Allowed
and press
Select
.
7. Press to return to standby.
To Next Page
Loading...
