Telstra TSH-D - Advanced Phone Settings; Software Version and Upgrades; DECT Wireless Settings; Changing Access PIN Code

27
BACK button
Phone version
1. Press
Menu , scroll to Phone Settings and press Select .
2. Scroll to Phone Version and press Select .
3. The software version will be displayed.
4. Press to return to standby.
Upgrade phone software
You can upgrade the phone to the latest software, this can be checked manually
or the phone checks for new software every time it is switched on or at 12:00am
everyday and sends a notication. The modem may also send a notication.
It is recommended that the battery shows at least 2 bars before upgrading
software.
Manually
1. Press
Menu , scroll to Phone Settings and press Select .
2. Scroll to
Phone Version and press Select .
3. Press
Upgrade , the screen will either display SW Up to Date or New SW Available .
If there is new software available press
Upgrade . Once the upgrade is complete
the phone will reboot.
Base or phone notification
1. When new software is available,
New SW available will display on the standby
screen.
2. Press
Menu , scroll to Phone Settings and press Select .
3. Scroll to Phone Version and press Select .
4. Press
Upgrade , the screen will display New SW Available
. Press
Upgrade .
Once the upgrade is complete the phone will reboot.






Advanced settings
Advanced settings availability are dependent on the modem that is being used.
DECT settings
Change PIN
Some functions are protected by a 4 digit PIN code which must be entered if
the settings are changed. The default depends on the gateway. The PIN can be
changed to a preferred number.