Teltonika FMT100 Installation Guide

Teltonika FMT100 GPS TRACKER INSTALLATION GUIDE
Additional configuration
notes if using the device
on our software platform.
1. Clean surface of vehicle battery.
2. Peel off sticky pad cover
3. Stick device to top of battery (cable exit point towards front of the vehicle)
4. Connect Black wire to Negative battery terminal.
5. Connect Red wire to Positive battery terminal.

Teltonika FMT100 Specifications

General

Purpose	Universal
Product color	Black
LED indicators	Yes
Electronic compass	-
GSM bands supported	850, 900, 1800, 1900 MHz
SIM card capability	Single SIM
International Protection (IP) code	IP65
USB version	2.0
USB connector type	Micro-USB
Built-in display	No
Battery voltage	3.7 V
Battery capacity	170 mAh
Battery life (max)	- h
Operating relative humidity (H-H)	5 - 95 %
Built-in memory capacity	0.128 GB
Certification	CE, EAC

Weight and Dimensions

Depth	57.6 mm
Width	92.5 mm
Height	14 mm
Weight	63 g