Need help?Do you have a question about the Teltonika FM4200 and is the answer not in the manual?
Important safety and handling precautions for the device.
Detailed safety instructions for operating the FM4200 device correctly and safely.
Overview of GSM/GPRS, GPS, and hardware features of the FM4200.
Details on the device's sleep modes and conditions for entering/exiting.
Explanation of the deep sleep mode, its power consumption, and limitations.
How the device switches profiles based on the GSM operator code.
How the device switches profiles based on I/O events.
Guide to using the FM4200 Configurator software for device setup.
Settings common to all profiles, controlling basic device behavior.
Settings for GPS data acquisition methods and frequencies.
Configuration of geofence zones for location-based event generation.
Settings related to GSM operation, including auto-answer and protocol.
Configuration for GPRS access, APN, IP address, and port.
Settings for SMS data transmission, login, password, and authorized numbers.
Command to retrieve current GPS data, including satellite count, latitude, and longitude.
Command to read a specific parameter value by its ID.
Command to set a new parameter value by its ID.
Lists parameters that are profile independent and common for all profiles.
Parameters related to how the device collects and sends data.
Configuration settings for SMS communication and parameters.
Parameter defining the GPRS Access Point Name.
Parameter for the APN username, if required by the operator.
Parameter for the APN password, if required by the operator.
Parameter for the AVL data destination server IP address.
Parameter for the AVL data destination server port number.
Basic settings for GeoFence Zone #1: shape, priority, and event triggers.
Sets the device operating mode: Normal, Sleep, or Deep Sleep.
Additional data sources recorded along with usual GPS data.
Parameter defining the priority level for IO property events.
Sets the high threshold for IO properties to generate events.
Sets the low threshold for IO properties to generate events.
Parameter defining the CAN bus baud rate.
Parameter defining the CAN element ID length (11 or 29 bits).
Parameter defining the CAN data mask for calculation and ignored bytes.
Parameter defining the CAN identifier.
Important safety and handling precautions for the device.
Detailed safety instructions for operating the FM4200 device correctly and safely.
Overview of GSM/GPRS, GPS, and hardware features of the FM4200.
Details on the device's sleep modes and conditions for entering/exiting.
Explanation of the deep sleep mode, its power consumption, and limitations.
How the device switches profiles based on the GSM operator code.
How the device switches profiles based on I/O events.
Guide to using the FM4200 Configurator software for device setup.
Settings common to all profiles, controlling basic device behavior.
Settings for GPS data acquisition methods and frequencies.
Configuration of geofence zones for location-based event generation.
Settings related to GSM operation, including auto-answer and protocol.
Configuration for GPRS access, APN, IP address, and port.
Settings for SMS data transmission, login, password, and authorized numbers.
Command to retrieve current GPS data, including satellite count, latitude, and longitude.
Command to read a specific parameter value by its ID.
Command to set a new parameter value by its ID.
Lists parameters that are profile independent and common for all profiles.
Parameters related to how the device collects and sends data.
Configuration settings for SMS communication and parameters.
Parameter defining the GPRS Access Point Name.
Parameter for the APN username, if required by the operator.
Parameter for the APN password, if required by the operator.
Parameter for the AVL data destination server IP address.
Parameter for the AVL data destination server port number.
Basic settings for GeoFence Zone #1: shape, priority, and event triggers.
Sets the device operating mode: Normal, Sleep, or Deep Sleep.
Additional data sources recorded along with usual GPS data.
Parameter defining the priority level for IO property events.
Sets the high threshold for IO properties to generate events.
Sets the low threshold for IO properties to generate events.
Parameter defining the CAN bus baud rate.
Parameter defining the CAN element ID length (11 or 29 bits).
Parameter defining the CAN data mask for calculation and ignored bytes.
Parameter defining the CAN identifier.
To Next Page
General
