Teltonika GH5200 - How-To Manual

https://wiki.teltonika-gps.com/view/How_to_read_data_from_TZ-BT04/05/05B_sensor_with_GH5200_
device
How to read data from TZ-BT04/05/05B
sensor with GH5200 device
Main Page > Autonomous Trackers > GH5200 > GH5200 FAQ > How to read data from TZ-BT04/05/05B sensor
with GH5200 device
Contents
1 How to read data from TZ-BT04/05/05B sensor with GH5200 device
1.1 Solution applies for these SAS devices
1.2 Configuration
How to read data from TZ-BT04/05/05B sensor with GH5200
device
Solution applies for these SAS devices
| TMT250 | GH5200 |
Configuration
These are instructions on how to easily read data from TZ-BT04/05/05B Bluetooth LE sensor with
GH5200 device.
First the GH5200 device Bluetooth settings need to be configured. These are the required steps:
Press Bluetooth settings.
Turn on BT Radio by pressing Enable (hidden) or Enable (visible).
Press Bluetooth 4.0 settings.
Select TZ-BT04/05/05B sensor in BLE connectionless functionalities section.
Type your TZ-BT04/05/05B ID in ID field.
After all these steps press Save to device to save configuration.
To start BLE scan right away press Discover BLE.