Need help?Do you have a question about the Teltonika GH4000 and is the answer not in the manual?
Introduces Track Assistant as a tool for device configuration and data review.
Outlines the steps for installing the Track Assistant software, including language selection.
Configures GPS data logging, coordinate searching, and periodic SMS sending.
Explains setting up active zones and receiving SMS alerts when zones are crossed.
Explains Geofence operation, including SMS events for crossing zones and graphical examples.
Describes the alarm function, how it differs from normal operation, and activation methods.
Details the 5 ways to activate/deactivate alarm mode, including keyboard and SMS.
Details alarm methods (CALL, GPRS, SMS), duration, and logging period.
Explains Pre-Alarm time, Man-Down, and Parking functions related to alarm.
Details alarm notification via CALL, GPRS, and SMS methods.
Explains alarm mode operation, activation priority, and the use of PreAlarm.
Details GPRS method for alarm data logging and sending, and call method for alarm deactivation.
Explains the Man-down function for monitoring device position changes and activating alarms.
Details how the Man-down function uses an accelerometer and displays device reactions to position changes.
Illustrates scenarios for Man-down function activation and provides usage recommendations.
Describes the Parking function for monitoring fixed locations and activating alarms.
Details parking function configuration and operation scenarios.
Shows scenarios for parking function operation when coordinates are found and the device leaves the zone.
Illustrates parking function scenarios where the device leaves and returns to the zone, or cannot find coordinates.
Depicts parking function scenarios when coordinates are not found and movement occurs or not.
Details the Silent Call function for covert listening and its activation methods.
Explains how to activate device functions using incoming calls from specific numbers.
Explains how to protect device configuration with a password.
Explains configuring SMS security to allow messages only from authorized numbers.
Explains configuring call security to accept calls only from authorized numbers.
Introduces the process of updating the device's firmware.
Guides through the steps to update the GH4000 firmware using Track Assistant software.
Introduces Track Assistant as a tool for device configuration and data review.
Outlines the steps for installing the Track Assistant software, including language selection.
Configures GPS data logging, coordinate searching, and periodic SMS sending.
Explains setting up active zones and receiving SMS alerts when zones are crossed.
Explains Geofence operation, including SMS events for crossing zones and graphical examples.
Describes the alarm function, how it differs from normal operation, and activation methods.
Details the 5 ways to activate/deactivate alarm mode, including keyboard and SMS.
Details alarm methods (CALL, GPRS, SMS), duration, and logging period.
Explains Pre-Alarm time, Man-Down, and Parking functions related to alarm.
Details alarm notification via CALL, GPRS, and SMS methods.
Explains alarm mode operation, activation priority, and the use of PreAlarm.
Details GPRS method for alarm data logging and sending, and call method for alarm deactivation.
Explains the Man-down function for monitoring device position changes and activating alarms.
Details how the Man-down function uses an accelerometer and displays device reactions to position changes.
Illustrates scenarios for Man-down function activation and provides usage recommendations.
Describes the Parking function for monitoring fixed locations and activating alarms.
Details parking function configuration and operation scenarios.
Shows scenarios for parking function operation when coordinates are found and the device leaves the zone.
Illustrates parking function scenarios where the device leaves and returns to the zone, or cannot find coordinates.
Depicts parking function scenarios when coordinates are not found and movement occurs or not.
Details the Silent Call function for covert listening and its activation methods.
Explains how to activate device functions using incoming calls from specific numbers.
Explains how to protect device configuration with a password.
Explains configuring SMS security to allow messages only from authorized numbers.
Explains configuring call security to accept calls only from authorized numbers.
Introduces the process of updating the device's firmware.
Guides through the steps to update the GH4000 firmware using Track Assistant software.
General| Device Type | GPS Tracker |
|---|---|
| Dimensions | 105 x 60 x 31 mm |
| Weight | 160 g |
| Power Supply | Rechargeable Li-ion battery |
| Operating Temperature | -20°C to +55°C |
| Tracking sensitivity | -165 dBm |
| GSM | Quad-band 850/900/1800/1900 MHz |
| SMS | Supported |
| Internal Memory | 16 MB |
| Ingress Protection Rating | IP67 |
| Update Rate | 1 Hz |
| Digital Outputs | 1 |
| Enclosure Rating | IP67 |
| GPS Accuracy | 3 meters |
| Connectivity | GSM |
| GNSS | GPS, GLONASS, Galileo, BeiDou |
| Accuracy | 3 meters |
| Data transfer | GPRS |
| Time To First Fix (Hot Start) | 1 second |
| Communication Interfaces | USB |
To Next Page
