Need help?Do you have a question about the Teltonika RUT500 and is the answer not in the manual?
General| Power Supply | 9-30 VDC |
|---|---|
| Wireless Standards | IEEE 802.11b/g/n |
| Operating Temperature | -40°C to +75°C |
| SIM Card Slot | 1 x Mini SIM |
| Cellular Connectivity | 2G/3G |
| Device Type | Industrial Router |
| Firmware Updates | Yes |
| Security | Firewall, VPN, WPA2 |
| Antenna | 2 x SMA for LTE, 1 x RP-SMA for WiFi |
Step-by-step guide for initial setup, including front panel ports and indicators.
Details on rear panel connectors and SIM card installation procedure.
Guide on how to access and log into the router's web management interface.
Overview of different connection and distribution modes supported by the router.
Displays router's system details like model, firmware, uptime, and load average.
Information on IP addresses, DHCP leases, and wireless station status.
Details on memory usage, and status for 3G and WAN network interfaces.
Settings for configuring the Local Area Network (LAN) interface.
Options for setting up the router's Wi-Fi access point or client connection.
Guide to setting up a wireless connection as the WAN interface.
Configuring LAN static IP/DHCP client and setting up the router's DHCP server.
Advanced DHCP server settings like IP range, lease time, and dynamic options.
Creating and configuring OpenVPN client instances.
Detailed explanation of OpenVPN parameters like protocol, port, authentication, and certificates.
Introduction to IPsec for establishing secure connections via transport or tunnel modes.
Configuring IPsec with automatic key exchange, NAT traversal, and identifier settings.
Configuring encryption, hash, and group settings for IPsec phases.
Guided setup for password change, 3G, and LAN configuration.
Configuring wireless settings like SSID, encryption, and mode through the wizard.
To Next Page
