To Next PageTo Next Page
Need help?Do you have a question about the Temco TFC42-4 and is the answer not in the manual?
Guidance on selecting the best placement for your fireplace considering room traffic and layout.
Detailed dimensions for fireplace installation and required framing, including various model sizes.
Information on installing combustion air kits and glass doors for improved fireplace efficiency.
Determining the path for the flue pipe and selecting the chimney outlet location for optimal draft.
Critical safety clearances required between the fireplace, chimney, and combustible materials.
Calculating thermal resistance (R-factor) for hearth extension materials and listing suitable components.
Instructions for framing the fireplace opening, ensuring the header is correctly positioned and level.
Details on installing a hearth safety strip under the fireplace on combustible floors.
Procedure for placing, leveling, and securely fastening the fireplace unit into the framed opening.
Instructions for creating ceiling and roof openings for the chimney, ensuring proper placement.
Proper installation of firestop spacers at ceiling levels to maintain required air space clearance.
Step-by-step guide for assembling inner and outer chimney pipe sections securely.
Guidelines and restrictions for installing chimney sections with elbows to create offsets.
Guidelines for determining the required chimney height based on roof penetration and peak proximity.
Using plumb bob and measurements to determine correct ceiling opening offset for chimney.
Table detailing rise and offset dimensions for various chimney section combinations with elbows.
Steps for correctly installing roof flashing and storm collar to ensure weatherproofing.
Procedure for attaching the chimney termination cap for final installation.
Guidelines for constructing and insulating a chase enclosure for the fireplace and chimney system.
Installing chase covers, collars, and termination caps for various chase configurations.
Specifics on chase installation, insulation, and sealing to prevent cold air infiltration.
Procedure for connecting a gas line to the fireplace for a decorative gas appliance.
Tips for insulating and sealing fireplace enclosures to prevent cold air problems.
Methods for sealing seams between the fireplace and finishing materials to maintain air spaces.
Specific modifications and exceptions for installing TEMCO fireplaces in mobile homes.
Using a universal firestop thimble for mobile home installations to eliminate truss cutting.
Guidelines for applying decorative facing materials like marble, stone, or tile to the fireplace.
Specifying noncombustible materials required for enclosing spaces around the fireplace and facing.
Illustrations and dimensions for projecting mantel legs along the fireplace radiation line.
Instructions for constructing raised hearths for flush face and louvered models, including R-factor.
Requirements for installing a hearth flat on the floor for all models, including R-factor and safety strip.
Instructions for opening and closing the firescreen and operating the flue damper rod.
Guidance on lighting fires, adding fuel, and managing ashes for efficient and safe operation.
Advice on suitable wood fuels and warnings against improper fuels or over-firing.
Information on creosote buildup, its risks, and the necessity of regular chimney inspection and cleaning.
List of replacement parts available from TEMCO dealers, including part numbers for different models.
General| Brand | Temco |
|---|---|
| Model | TFC42-4 |
| Category | Indoor Fireplace |
| Language | English |
