To Next PageTo Next Page
Need help?Do you have a question about the Temco TLC36-3MB and is the answer not in the manual?
This section provides essential notes and guidance before starting fireplace installation.
Covers basic rules, clearances, and material placement for safe installation.
Details required chimney components, air kits, grounding, and manual reading.
Discusses factors for selecting the best location and provides framing dimensions.
Covers air kits, gas lines, drafts, flue routing, and chimney outlet considerations.
Details firebox, chimney clearances, hearth extensions, and combustible material placement.
Specifies minimum dimensions and R-factor requirements for hearth extensions.
Explains how to determine thermal resistance (R-value) for hearth materials.
Guides through framing the opening, installing the hearth safety strip, and securing the firebox.
Details framing openings, installing firestop thimbles, and storm collars.
Covers the process of assembling chimney sections and installing the termination cap.
Outlines rules for using elbows and supports in offset chimney installations.
Explains the 10-foot rule of thumb for chimney height and roof clearances.
Provides data on vertical gain and horizontal/vertical offset for various chimney components.
Details the installation of essential chimney termination components.
Covers gas line requirements, clearances, and optional cold climate insulation.
Discusses various finishing materials and their placement on the fireplace face.
Explains lintel requirements for facing materials and the use of surround kits.
Guides on operating firescreens, dampers, and combustion air controls.
Provides instructions on selecting fuel, starting fires, and avoiding over-firing.
Covers ash disposal, creosote removal, refractory care, and chimney cleaning.
Lists available replacement parts for the main fireplace unit.
Lists available replacement parts specifically for glass door assemblies.
Details the duration, scope, and exclusions of the fireplace limited warranty.
Outlines the duties of the owner to maintain warranty validity.
Provides instructions on how to complete and mail the warranty registration form.
Highlights the main questions asked on the warranty registration form.
Details the one-year warranty, terms, and conditions for glass door kits.
Lists specific exclusions, including glass breakage and consequential damages.
Outlines the one-year warranty terms for TEMCO blower kits.
Covers limitations, exclusions, and disclaimers specific to blower kit warranties.
General| Brand | Temco |
|---|---|
| Model | TLC36-3MB |
| Category | Indoor Fireplace |
| Language | English |
