EasyManua.ls Logo

Tempest GBS-16 - Operating Procedures; Pre-Operation Checks and Fueling

Tempest GBS-16
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Procedures
Page 8
e information and instructions in this section should be routinely reviewed and fol-
lowed before the actual operation of TEMPEST CONFINED SPACE FANS.
Pre-Operation
VISUAL INSPECTION
A er receiving and unpacking your fan, be sure to carefully inspect it for any damage
that might have occurred during shipping. Should you  nd any damage:
PLEASE NOTIFY TEMPEST TECHNOLOGY CORP.
TM
IMMEDIATELY AT
800.346.2143
ENGINE OIL
Be sure to use only high quality detergent oil. Detergent oils keep the engine cleaner
and retards the formation of gum and varnish deposits.
RECOMMENDED OILS
HONDA engines: SF or SG SAE 10W-30 oil.
FILLING THE CRANKCASE
Place blower on a level surface and make sure that the engine is level. Remove the oil
ll plug or dipstick. POUR OIL SLOWLY into the crankcase. Replace oil  ll plug or
dipstick and tighten securely. Refer to the engine manufacturers Owners Manual for
additional information regarding speci c oil requirements.
CAUTION: DO NOT OVERFILL THE ENGINE. EXCESS OIL VAPOR
CAN BE EJECTED FROM THE ENGINE BREATHER WHILE RUN-
NING IN A TILTED POSITION.
ENGINE
CAPACITY
HONDA GX120 18.90  . oz. / 0.59 Quarts / 0.56 Liters
HONDA GX160 19.52  . oz. / 0.61 Quarts / 0.58 Liters