3G 11N Wireless Router
7
It is always connected with DSL Modem, Cable
Modem, or direct Internet line provided by ISP to
access the Internet.
¾ LAN (1, 2, 3, 4)
4 10/100Mbps Ethernet ports can be connected
with Ethernet switch, Ethernet router and NIC card.
¾ WPS
Wi-Fi Protected Setup button, Press it for 1 second,
the WPS feature will be enabled and WPS indicator
will be shown blinking.
Chapter 2 Hardware Installation
2.1 How to Install the Router
After you unpack the box, please follow the steps below
to connect the device. For better wireless performance,
please put the device in the middle of wireless coverage
area.
1. Please use the included power adapter to power on
the Router. (IMPORTANT: Use of a different power
adapter could cause damage and void the warranty for
this product.)
To Next Page
Loading...
