3G 11N Wireless Router
18
Internet, please select this type.
¾ Wired WAN: In this type the WAN link line must be
wired. Please connect the access line to the WAN
port on the Router’s rear panel. The default type is
wired WAN.
¾ Wireless WAN: If you are provided the wireless
WAN to access the Internet or you want to amplify
the wireless signals, you can use this type.
Please select the different WAN medium type according
to the different access ways provided by your ISP. After
saving and rebooting the device, you can enter the
“
Setup Wizard” menu to set the connection type.
Chapter 5 Quick Setup Guide
This chapter deals with how to access the Internet
quickly.
After you enter the Router’s Web-based interface from
the Internet Explorer, please select the access medium
type provided by your ISP in “WAN Medium”. After
saving and rebooting the device, please select your
connection type (PPPOE, Dynamic IP, and Static IP etc.)
provided by your ISP to finish the basic settings. Please
follow this guide to connect your Router to the Internet.
5.1 Setup Wizard
To Next Page
Loading...
