3G 11N Wireless Router
¾ MAC Address：Shows current MAC addresses of
the hosts connecting to the Router.
¾ Bandwidth：Shows current frequency bandwidth
the wireless client used.
Chapter 8: DHCP Server
8.1 DHCP Settings
DHCP (Dynamic Host Control Protocol) is to assign an IP
address to the computers on the LAN/private network.
When you enable the DHCP Server, the DHCP Server will
allocate automatically an unused IP address from the IP
address pool to the requesting computer in premise of
activating “Obtain an IP Address Automatically”. So
specifying the starting and ending address of the IP
Address pool is needed.
58
To Next Page
Loading...
