Super easy IP Camera
37
5.2.3.3 Image parameters
The camera will switch to Night Mode in the case of poor lighting, when the Night Mode is
"On", and the IR LED Control is set "Auto". When the camera is in Night Mode , the image of the
camera is black and white. If in the day, you see the image of the camera is black and white, you
can increase lighting or turn off the Night Mode to solve it. If any one of Night Mode and IR
LED closed at night(there is no lighting), the camera can’t work normally.
Note: When you modify the parameters, you need to click Apply to save your settings.
To Next Page
Loading...
