Need help?Do you have a question about the Tenda HD series and is the answer not in the manual?
General| Resolution | 1080p |
|---|---|
| Night Vision | Yes |
| Motion Detection | Yes |
| Two-Way Audio | Yes |
| Connectivity | Wi-Fi |
| Wireless Standard | 802.11n |
| Wireless Security | WPA/WPA2 |
| Storage | Micro SD card (Up to 128G storage) |
| Power Supply | DC 5V/1A |
Lists all items included in the product package.
Specifies the minimum hardware and software needed for the camera.
Overview of HD/SD series cameras, their capabilities, and key functionalities.
Details the physical mounting and setup of the IP cameras.
Instructions for placing the camera on a flat surface.
Specific steps for installing the Cube IP Camera on a table.
Specific steps for installing the PTZ IP Camera on a table.
Instructions for mounting the camera on a wall.
Specific steps for installing the Cube IP Camera on a wall.
Specific steps for installing the PTZ IP Camera on a wall.
Guides on connecting the camera to power and network.
Steps for connecting the PTZ camera to network and power.
Steps for connecting the Cube IP camera to network and power.
Accessing and viewing the live video stream, including status bar details.
Settings for language, video quality, and camera movement control.
Managing image capture, video recording, and playback functionalities.
Navigating to the main system settings for further camera configuration.
Adjusting video stream settings like resolution, bit rate, and frame rate.
Settings for audio input volume, output volume, and audio encoding types.
Adjusting image settings like brightness, saturation, contrast, and night mode.
Configuring static or dynamic IP addresses, subnet mask, gateway, and ports.
Connecting the camera to a wireless network and managing Wi-Fi settings.
Setting up remote access using third-party DDNS services.
Enabling and configuring ONVIF protocol for NVR compatibility.
Setting up motion detection zones and sensitivity for triggering alarms.
Configuring sound detection sensitivity and triggering alarms based on audio events.
Defining actions to take when an alarm is triggered (e.g., email, snap).
Scheduling specific times for alarm events to be active.
Configuring automatic image capture at set intervals or times.
Setting up the camera to record video clips to a TF/SD card.
Configuring email alerts and notifications for alarm events.
Configuring the camera to send captured images or video to an FTP server.
Configuring PTZ movement patterns, speed, and alarm behavior.
Options to enable or disable the camera's status indicator LED.
Setting up user accounts and synchronizing the camera's date and time.
Instructions on how to restart the IP camera.
Resetting the camera to its original factory default settings.
Procedures for backing up/restoring settings and firmware upgrades.
Accessing and reviewing system event logs for troubleshooting purposes.
Accessing live video and checking the operational status of the SD series camera.
Configuration options for video quality, resolution, and frame rate for the SD series camera.
Adjusting video stream settings like resolution, bit rate, and frame rate for the SD series camera.
Configuration options related to network connectivity for the SD series camera.
Configuring static or dynamic IP addresses for the SD series camera.
Connecting the SD series camera to a wireless network.
Setting up remote access for the SD series camera using DDNS or UPnP.
Setting up motion detection sensitivity and alarm armed times for the SD series camera.
Assigning a name to the camera and setting the local recording path.
Configuring email alerts and FTP uploads for alarm events on the SD series camera.
Configuring user accounts, date/time, and PTZ movement for the SD series camera.
Procedures for resetting, rebooting, and upgrading the Web UI of the SD series camera.
Procedures for upgrading the system firmware of the SD series camera.
To Next Page
