www.tenda.cn
you want to set it.
About Email Setting, you can enter CD Driver: \ FAQ\FAQ-en, please refer to the FAQ-en
question 4 for detai.
Note: When you modify the parameters, you need to click Apply to save your settings.
4.5.4. Scheduled time setting
Select the time you want to alarm. The default value is all time. If you want to alarm on
certain time, you can select it on the time table.
The device will trigger the alarm only during the scheduled time period, you can select the
scheduled time according to your request. As shown above, it sets armed time from Mon 8:30 to
9:30, you only need to click the corresponding time block to set them, the time block will become
green when you selected.
Note: Please make sure your system time is correct before you set the alarm time period.
Please refer to chapter 4.8.2 to set system time.
Note: When you modify the parameters, you need to click Apply to save your settings.
4.6. Advanced setting
4.6.1. Auto capture
The camera will snap to TD/SD card or FTP server in the selected time by the time interval
you setting.
To Next Page
Loading...
