www.tenda.cn
directory is D:\Record and D:\Snap );
5. Talk button : Click this button to hear what the person at the side of computer talks.
Click it again, it will stop playing;
6. Audio monitor button : Click this button to hear what people talking about at the side
of IP Cameras,
2) Select language and bit-rate
You can change language between Chinese and English.
You can select 720P（Image quality is best）, VGA（Image quality is good） and QVGA
（Image quality in general） to view video, example for view video by 720P in LAN, by VGA in
internet, by QVGA in smartphone.
3) PTZ control
If the camera supports PTZ function, you can click up, down, left, right arrow to control the
camera moving, click button to center the camera.
When you set camera to a preset position, and then click button, after the camera is
changed to other direction, click button can move the camera to the position you have set.
4) Snap/record/SD card/playback
Click “Snap” button, to save the picture to the default path D:\Snap(If you want to
change the file path, please click to set specified path)
Click “Record” button to start record. Click again to stop record, the default path is
D:\Record((If you want to change the file path, please click to set specified path)
Click “Check TF/SD card” can browse the files in the SD card (If the SD card already
inside the camera), you can select file to download it;
Click “Playback” button, it will show a player which can play the record video. For these buttons
means:‘Play/Pause’;‘Open file’;‘Stop’；‘Prev file’ ;
‘Next file’；‘Frame’；‘Speed –’；‘Speed +.
5) Click “System settings” button to enter system setting web page, you can configure
your camera.
To Next Page
Loading...
Need help?
General
