Super easy IP Camera
41
5.2.7 Alarm setting
5.2.7. 1 Motion Detection Setting
If users set to monitor certain area, when there is exception occurs in this area, it will trigger
alarm. In the sensitivity options, when sensitivity higher, more easily to trigger alarm.
If the motion detection windows was designated , and then click "Apply", and do" Alarm
mode setting" (Refer to 4.5.3 Alarm mode setting, such as E-mail Alarm and Email setting
success) ,if an exception occurs in the selected windows, alarm is triggered automatically, then
send the pictures to the corresponding mailbox.
Please click “apply” after the settings are done, and motion detection takes effect.
Move the cursor to here, when the arrows into
a two-way arrow, press the mouse left key drag
can zoom in on the rectangular frame size
This area is motion detection area, if alarm set
success, when there is movement in this area,
camera will trigger alarm
To Next Page
Loading...
