32
8.2 Setting up a parental controls rule
Configuration procedure:
A parental controls rule takes effect based on the IP address. Thus, to ensure that the rule takes effect
correctly, you had better use the IP-MAC binding function to bind an IP address to the device you want
to control. Refer to IP-MAC binding for details.
Step 1 Choose Parental Controls to enter the configuration page.
Step 2 Set the button to state.
Step 3 Set the period at which the rule takes effect.
Step 4 Set the date on which the rule takes effect.
Step 5 Select a Website Restrictions mode, and set the websites allowed or disallowed to visit.
---End
To Next Page
Loading...
