Tenda F6 User Manual

37
9.2 IP-MAC binding
The IP-MAC Binding function enables clients to obtain a fixed IP address, to ensure that the IP
address-based functions, such as port forwarding, DMZ host and other functions of the router can
take effect properly. This function is only effective when the DHCP server of the router is enabled.
Choose Advanced, and move to IP-MAC Binding module to access the configuration page.
Parameter Description:
Parameter
Description
IP Address
It specifies the IP address to be reserved for the client with the specified MAC
address. It should be belong to the DHCP address pool.
MAC Address
It specifies the MAC address of the client that needs a fixed IP address.
Operation
: It is used to add an IP-MAC binding rule.
: It is used to delete an IP-MAC binding rule.
9.2.1 Configuring an IP-MAC binding rule
Adding a rule
Step 1 Choose Advanced to enter the configuration page, and move to IP-MAC Binding module.
Step 2 Enter an IP address included in the DHCP address pool.
Step 3 Enter the MAC address of the client which needs a fixed IP address.
Step 4 Click .
Step 5 Click OK on the bottom of the page.
---End

Tenda F6 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Antennas quantity	4
Antenna gain level (max)	5 dBi
Product type	Tabletop router
Product color	White
LED indicators	WLAN
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Frequency band	2.4 GHz
Firewall security	Support Oray.com，88ip
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Cables included	LAN (RJ-45)
Certification	CCC, CE
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
DSL WAN	No
WAN connection type	RJ-45
Power source type	DC
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	211 mm
Width	204 mm
Height	147.5 mm