35
----End
When an AP firmware is upgrading, please DO NOT power off the AP, otherwise it may cause damage to the AP! If a
sudden power failure occurs, please upgrade again. If you cannot log in to AP's Web UI after a sudden power failure,
please contact our technical support.
Reset
To reset online APs to default factory settings:
Step 1 Log in to the web UI of AC, click Manage AP > AP Modify.
Step 2 Select online APs to be reset.
Step 3 Click Reset.
----End
Delete
To delete offline APs:
Step 1 Log in to the web UI of AC, click Manage AP > AP Modify.
Step 2 Select offline APs to be deleted.
Step 3 Click Delete.
----End
If the AP is offline, it keeps configuration delivered before. Users can still use their wireless network unless the AP is
restored to factory settings.
To Next Page
Loading...