36
Modify
Click on the right page to modify the AP's RF settings.
Parameter Description:
Enable/disable AP's WiFi in each band.
Countries apply for their own regulations to the allowable channels, allowed users and maximum power
levels within the frequency ranges. Consult your local authorities as these regulations may be out of date
as they are subject to change at any time. Most contries allow the first eleven channels in the
spectrum.It specifies country or region where this device is located. You can select the country or region
to ensure that this device complies with the channel regulations of the country or region.
Select a Network Mode. 2.4 GHz band includes 11b, 11g, 11b/g and 11b/g/n, while 5 GHz band includes
11a, 11ac and 11a/n. Descriptions are as follows.
11b: Works in 2.4 GHz band and supports up to 11 Mbps.
11g: Works in 2.4 GHz band and supports up to 54 Mbps.
To Next Page
Loading...