Tenda M3 - Page 53

47
An example of configuring VLAN settings
Network Topology
Topology description: (here takes F1226P as an example)

Create 3 802.1Q VLAN rules on the switch, VLAN IDs and corresponding ports are as below:
− VLAN2: Interface 2, port link type is Access;
− VLAN3: Interface 3, port link type is Access;
− VLAN4: Interface 4, port link type is Access;

Set 2 trunk ports, details is as below:
− Interface 7: Trunk port, PVID=1, all VLANs are allowed;
− Interface 8: Trunk port, PVID=1, all VLANs are allowed;
Configuration steps:
Step 1 Log in to the web UI of AC, click System Tools > Network Setting > VLAN Settings.
Tablet
Port3:VLAN3
Port5
Router
F1226 PoE Switch
AC
PC
AP
AP
AP
Smartphone
Laptop
Port2:VLAN2
Port4:VLAN4
Port1:VLAN2,3,4
Port8
Port7
WAN
LAN