Tenda N300 Wi-Fi xPON ONT - Page 22

WLAN
14
Parameter
Description
Band
It specifies the wireless band and protocol of the Wi-Fi network.
⚫
2.4 GHz (B): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11b
protocol can connect to the 2.4 GHz wireless network of the ONT. The maximum
wireless rate is 11 Mbps.
⚫
2.4 GHz (G): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11g
protocol can connect to the 2.4 GHz wireless network of the ONT. The maximum
wireless rate is 54 Mbps.
⚫
2.4 GHz (B+G): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11b
or IEEE 802.11g protocol can connect to the 2.4 GHz wireless network of the ONT.
⚫
2.4 GHz (N): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11n
protocol can connect to the 2.4 GHz wireless network of the ONT. The maximum
wireless rate is 300 Mbps.
⚫
2.4 GHz (G+N): In this mode, the 2.4 GHz wireless devices compliant with IEEE 802.11g
or IEEE 802.11n protocol can connect to the 2.4 GHz wireless network of the ONT.
⚫
2.4 GHz (B+G+N): In this mode, the 2.4 GHz wireless devices compliant with IEEE
802.11b, IEEE 802.11g or IEEE 802.11n protocol can connect to the 2.4 GHz wireless
network of the ONT.
Mode
It specifies the wireless operation mode of the ONT.
AP: The ONT serving as a wireless access point provides a wireless network for wireless
clients.
Multiple AP
You can click Multiple AP to create more wireless networks of the same band.
⚫
No.: It specifies the No. of the AP Wi-Fi network.
⚫
Enable: It specifies whether to enable the AP Wi-Fi network.
⚫
Band: It specifies the wireless band and protocol of the AP Wi-Fi network.
⚫
SSID: It specifies the Wi-Fi name of the AP Wi-Fi network.
⚫
Broadcast SSID: It specifies whether to hide the SSID of the AP Wi-Fi network. Enabled
means that the SSID is displayed. Disabled means that the SSID is hidden, and you need
to enter the SSID of the Wi-Fi network manually to connect to it.
⚫
Active Client List: You can click it to view the information of clients connected to the
Wi-Fi network.
⚫
Reset: You can click it to discard the unsaved modifications on this page.
SSID
It specifies the Wi-Fi name of the main Wi-Fi network.
Channel Width
It specifies the bandwidth of the wireless channel of the Wi-Fi network.
⚫
20MHz: It indicates that the channel bandwidth used by the ONT is 20 MHz.
⚫
40MHz: It indicates that the channel bandwidth used by the ONT is 40 MHz.
⚫
20/40MHz: It specifies that the ONT can switch its channel bandwidth between 20 MHz
and 40 MHz based on the ambient environment.
Channel Number
It specifies the channel in which the Wi-Fi network works.
You are recommended to choose a channel with less interference for better wireless
transmission efficiency. You can use a third-party tool to scan the Wi-Fi signals nearby to
understand the channel usage situations.
⚫
Auto: It indicates that the ONT automatically adjusts its operating channel according to
the ambient environment.