Tenda N300 Wi-Fi xPON ONT - Connect to the Wi-Fi Network Using PBC on the Web UI

WLAN
25
5.5.3 Connect to the Wi-Fi network using PBC on the web UI
Step 1 Get the ONT ready for WPS negotiation.
1. Log in to the web UI of the ONT.
2. Choose WLAN > WPS.
3. Click Start PBC.
If the following message is displayed, the PBC is started successfully.
Step 2 Configure the WPS function on your wireless devices within 2 minutes. Configuration on
various devices may differ (Example: HUAWEI P10 smartphone).
1. Find Settings on the phone.
2. Choose WLAN.
3.
Tap , and choose WLAN settings.