Tenda N300 Wi-Fi xPON ONT - Dhcpv6

Advance
78
Parameter
Description
Prefix
They specify the prefix information included in the RA message to hosts for
generating their IPv6 address.
Prefix Length
AdvValidLifetime
They specify the Advertisement Valid Lifetime and Advertisement Preferred Lifetime.
When the preferred lifetime expires, the use of the prefix is not encouraged, but not
prohibited. When the valid lifetime expires, the prefix becomes invalid.
The valid lifetime must be greater than or equal to the preferred lifetime.
AdvPreferredLifetime
Enable ULA
It specifies whether to enable the Unique Local Address (ULA).
The purpose of ULA resembles that of the private network address in IPv4. It is only
used within the private network and increases stability for the IPv6 host and its use of
services.
ULA Prefix
They specify the ULA prefix information advertised by the ONT to hosts for generating
unique local addresses.
ULA Prefix Len
ULA Prefix Valid Time
They specify the valid lifetime and preferred lifetime of ULA prefix.
When the preferred lifetime expires, the use of the ULA prefix is not encouraged, but
not prohibited. When the valid lifetime expires, the ULA prefix becomes invalid.
The valid lifetime must be greater than or equal to the preferred lifetime.
ULA Prefix Preferred
Time
8.2.3 DHCPv6
IPv6 hosts may automatically generate IP addresses internally using Stateless Address
Autoconfiguration (SLAAC), or they may be assigned configuration with Dynamic Host
Configuration Protocol version 6 (DHCPv6). When the DHCPv6 server is enabled, the ONT can
assign IPv6 hosts with IP addresses, IP prefixes and other configurations required for IPv6 internet
access.
To access the page, log in to the web UI of the ONT and choose Advance > IPv6 > DHCPv6.