Tenda N300 Wi-Fi xPON ONT - Acl

Admin
90
10.7 ACL
Access Control List (ACL) is a collection of permit and deny rules that ensure security by blocking
unauthorized users from and allowing authorized users to access ONT.
To access the page, log in to the web UI of the ONT and choose Admin > ACL.
Parameter description
Parameter
Description
ACL Capability
It specifies whether to enable the ACL function of the ONT.
Enable
It specifies the control mode of the function.
⚫
When Enable is selected, traffic that meets the criteria of the rule can pass through the
specified port of the ONT.
⚫
When Enable is deselected, traffic that meets the criteria of the rule is discarded at the
specified port of the ONT.
Interface
It specifies the interface that the access control rule applies to, including LAN and WAN.
⚫
LAN: The ONT checks traffic from the LAN side according to the rule and decides to pass
it or discard it.
⚫
WAN: The ONT checks traffic from the WAN side according to the rule and decides to
pass it or discard it.
Start IP Address
They specify the IP address range or a certain IP address that is controlled by the rule.