Tenda O1 - Page 113

105
Name
Description
ASCII
It indicates that a key selected for the Open or Shared authentication type contains
ASCII characters.
5 or 13 ASCII characters are allowed in the key.
Hex
It indicates that a key selected for the Open or Shared authentication type contains
hexadecimal characters.
10 or 26 hexadecimal characters (range: 0-9, a-f, and A-F) are allowed in the key.
WPA-PSK, WPA2-PSK, and Mixed WPA/WPA2-PSK
Parameters description
Name
Description
Security Mode
It indicates the personal or pre-shared key security mode, including WPA-PSK,
WPA2-PSK, and Mixed WPA/WPA2-PSK.

WPA-PSK: It indicates that the wireless network corresponding to the selected
SSID is encrypted using WPA-PSK.

WPA2-PSK: It indicates that the wireless network corresponding to the selected
SSID is encrypted using WPA2-PSK.

Mixed WPA/WPA2-PSK: It indicates that wireless clients can connect to the
wireless network corresponding to the selected SSID using either WPA-PSK or
WPA2-PSK.
Encryption Algorithm
It specifies the encryption algorithm corresponding to the selected security mode. If
Security Mode is set to WPA-PSK, this parameter has the AES and TKIP values. If
Security Mode is set to WPA2-PSK or Mixed WPA/WPA2-PSK, this parameter has the
AES, TKIP, and TKIP&AES values.

AES: It indicates the Advanced Encryption Standard.

TKIP: It indicates the Temporal Key Integrity Protocol. If TKIP is used, the maximum
wireless throughput of the AP is limited to 54 Mbps.

TKIP&AES: It indicates that both TKIP and AES encryption algorithms are
supported. Wireless clients can connect to the wireless network corresponding to
the selected SSID using TKIP or AES.