EasyManuals Logo

Tenda O1 User Manual

Tenda O1
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
131
Parameters description
Name
Description
SSID
It specifies the SSID of this device. With the rule enabled, clients connected to the
network with this SSID will be controlled by the rule.
Access Control
It specifies whether to enable the Access Control function.
Mode
It specifies the mode for filtering MAC addresses.
Allow: It indicates that only the wireless clients on the access control list can
connect to the WiFi network of the device.
Disallow: It indicates that only the wireless clients on the access control list cannot
connect to the WiFi network of the device.
7.3.3 Example of configuring access control
Networking requirement
A wireless network whose SSID is Connect me has been set up in a residential community. Only
the community members are allowed to connect to the wireless network.
The Access Control function of the CPE is recommended. Assume that the users have three
wireless devices whose MAC addresses are C8:3A:35:00:00:01, C8:3A:35:00:00:02, and
C8:3A:35:00:00:03.
Configuration procedures
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Wireless > Access Control, and enable the Access Control function.
Step 2 Set the Mode to Allow.
Step 3 Enter the MAC address, which is C8:3A:35:00:00:01 is this example, and click Add.
Step 4 Perform Step 3 to add the other two MAC addresses.
Step 5 Click Save.

Other manuals for Tenda O1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda O1 and is the answer not in the manual?

Tenda O1 Specifications

General IconGeneral
5 GHzNo
Bandwidth2.4 GHz
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate300 Mbit/s
PlacementWall
CertificationFCC/CE/RoHS
Product colorWhite
LED indicatorsLAN, PoE, WLAN
International Protection (IP) codeIP64
Output voltage9 - 12 V
Power consumption (max)2.6 W
Security algorithmsWEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Antenna featuresIntegrated antenna
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth67.5 mm
Width80 mm
Height190.35 mm

Related product manuals