TEG1216T/1224T Giga Web Smart Switch
Chapter 3 Configuration Guide
3.1 Fast Log In
Notice: You must configure IP for the managing PC, because the
TEG1216T/1224T without the built-in DHCP server. The default
parameter of the switch is listed as below:
parameter Default
Default IP
address
192.168.0.1
Default
user’s
name
admin
Default
password
admin
You can log in the switch setting window through the steps as below:
a. connect the switch with the managing PC adapter .
b. turn on the switch power supplier.
c. make sure the PC IP address belong to 192.168.0.xxx , e.g:
192.168.0.100(xxx is the integer between 2~254 ). Please consult
the appendix 3 .
d. open the browser , input the http://192.168.0.1 and “Enter” it, you
will see the switch login window as below (take TEG1224T as
sample) :
12
To Next Page
Loading...
