Need help?Do you have a question about the Tenda TEF1210P-8-150W and is the answer not in the manual?
General| PoE Standard | IEEE 802.3af/at |
|---|---|
| Total PoE Power Budget | 150W |
| Switching Capacity | 5.6 Gbps |
| Forwarding Rate | 4.17 Mpps |
| MAC Address Table | 8K |
| Dimensions | 440 x 180 x 44 mm |
| Lightning Protection | 6 kV |
| Jumbo Frame | Up to 9K |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Standard&Protocol | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
| Input Voltage | 100-240V AC |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| Ports | 8x 10/100Mbps PoE ports, 2x Gigabit SFP slots |
Details how to access the switch via its web interface using default credentials and network setup.
Provides instructions for safely exiting the web administration page of the switch.
Explains the three main parts of the web administration interface: navigation bars and configuration zone.
Allows viewing basic switch information and configuring IP address or MAC aging time.
Enables modification of login username and password to prevent unauthorized access.
Restores switch configurations to factory default settings, clearing all current settings.
Reboots the switch to clear cache and remove unwanted messages for optimal performance.
Guides on downloading and installing the latest firmware for enhanced functionality and stability.
Allows checking and setting basic parameters for all switch ports, including enable/disable and speed/duplex.
Explains port mirroring for data duplication to monitor traffic, analyze performance, and diagnose faults.
Enables checking and clearing data flow statistics for all switch ports.
Allows setting the transmit (Tx) and receive (Rx) rates for downlink ports.
Defines Link Aggregation as grouping multiple physical ports to expand bandwidth and improve reliability.
Guides on configuring static aggregation by selecting aggregation algorithm and member ports.
Enables extending data transmission and PoE power distance on downlink ports for convenient network deployment.
Displays and allows enabling/disabling the PoE power function for selected downlink ports.
Explains VLANs for logically segmenting networks, improving performance, and enhancing security.
Details configuring Port VLANs, including mode toggle and assigning ports to VLANs.
Automatically groups ports into separate VLANs for simplified network security and management.
Details the 802.1Q standard for VLAN tagging, including configuration of TPID, Priority, CFI, and VLAN ID.
Provides static MAC address binding and MAC filtering to enhance network security and user authority.
Introduces QoS for managing network traffic quality, bandwidth, and reducing delay.
Explains Spanning Tree Protocol (STP) for ensuring loop-free topologies and providing redundant links.
Manages and controls multicasting groups using IGMP Snooping for network bandwidth saving.
Introduces SNMP for remote network management, monitoring, and configuration of devices.
Instructions on backing up the switch's current configuration to a PC for troubleshooting and future use.
Guides on restoring the switch to its original configuration from a backed-up file.
Provides warnings related to Class A product operation and potential radio interference in domestic environments.
Details FCC compliance for Class A digital devices, including limits and conditions for operation.
To Next Page
