Need help?Do you have a question about the Tenda TEG3224T and is the answer not in the manual?
Details the 24 10/100/1000Mbps RJ-45 ports, 2 Gigabit SFP combo ports, and 1 RS-232 console port.
Lists features like store-and-forward, bandwidth, forwarding rate, MAC entries, jumbo frames, DSCP, VLANs, etc.
Describes management methods: RS-232 console, SNMP V1/V2c, Web, Telnet, and CLI.
Provides instructions to avoid incorrect installation and ensure device safety and proper operation.
Details methods for logging into the switch: Web-based and Console Port connection.
Steps to log in via the web interface, including default IP, username, and password.
Covers System Information, IP & Time, Account, and Power Save settings.
Details settings for port speed, duplex, flow control, maximum frame size, and collision mode.
Explains Link Aggregation (Trunking) and its benefits, supporting up to 12 trunk groups.
Covers STP Introduction, 802.1d STP, 802.1w Rapid STP, and system/port settings.
Details port-based 802.1x authentication system and port settings with RADIUS server.
Explains IGMP Snooping configuration, including global and per-VLAN settings.
Covers aging configuration, MAC table learning modes (Auto, Disable, Secure), and static entries.
Explains VLANs, their advantages, types, memberships, and port configurations.
Details QoS introduction, 802.1Q VLAN frame, priority tagging, DSCP, scheduling, and configuration.
Covers ACL introduction, configuration wizard, policy rules, port policies, and typical application rules.
Tool to troubleshoot IP connectivity by sending ICMP PING packets and analyzing responses.
To Next Page
General
