Need help?Do you have a question about the Tenda TEF1218P-16-250W and is the answer not in the manual?
General| PoE Ports | 16 |
|---|---|
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 250W |
| MAC Address Table | 8K |
| Dimensions | 440 x 180 x 44 mm |
| Storage Temperature | -40°C to 70°C |
| Jumbo Frame | Up to 9K |
| Ports | 16 |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% (non-condensing) |
Steps to access the switch's web interface using default credentials.
Guides on updating the switch's firmware for new features or fixes.
Enforces static MAC address-to-port mapping for enhanced security.
Manages network traffic priority using scheduling algorithms like FIFO, SP, WRR.
Prevents network loops and provides redundancy using Spanning Tree Protocol.
Configures global STP parameters like version, priority, and timers.
Enables remote monitoring and management using Simple Network Management Protocol.
Saves the current switch configuration to a file for backup.
To Next Page
