Need help?Do you have a question about the Tenda TEG1016D and is the answer not in the manual?
General| MAC address table | 8000 entries |
|---|---|
| Store-and-forward | Yes |
| Maximum data transfer rate | 32 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| Wi-Fi | No |
| Size (imperial) | 11 \ |
| Power requirements | 100 - 240 V |
| Networking features | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Connectivity technology | Wired |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 1000Base-T, 100Base-TX, 10Base-T |
| Switch type | Unmanaged |
| Power connector | DC-in jack |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Certification | QA |
| Product color | Blue |
| Power consumption (typical) | 25 W |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
Instructions for installing the switch in a rack.
Steps for physically mounting the switch onto a rack.
To Next Page
