2
PnP, full-duplex, flow control, and can choose the best network connectivity
mode automatically to avoid the complex setting procedure.
z Supports auto MDI/MDIX function; predigest the network span and
maintenance.
z Supports IEEE802.3x flow control for full-duplex, and back pressure flow
control for half-duplex.
z As high as 32/48Gbps backplane bandwidth; supports non-blocking
wire-speed forwarding.
z Supports store-and-forward switching method.
z Internal universal power supply.
z Supports MAC address auto-learning function, integrated 8K MAC
address table.
Checklist
Please check the articles carefully after you open the packing as below:
9 One 16/24-Port Gigabit Ethernet switch
9 Mounting ears, eight screws, four rubber feet
9 One power cord
9 This manual
If any of listed items are mismatched, missing or damaged, please contact
the Tenda reseller from whom you purchased for replacement immediately.
To Next Page
Loading...
