EasyManuals Logo

Tenda TEG1016D User Manual

Tenda TEG1016D
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
1
Introduction
The TEG1016D/1024D Gigabit Ethernet Switch, a mini desktop switch, is
designed to resolve data transfer bottleneck in the enterprises and Internet
Cafe. It has 16/24 10/100/1000Mbps auto-negotiation Ethernet ports and
high-speed dynamic memory, supports auto MDI/MDI-X and
store-and-forward function to make sure the packet to be sent each port
effectively. “Plug and play” function helps you set up easily. In addition, the
Gigabit ports can be used as normal ports, as well as Uplink ports to connect
backbone network. You can replace the 10/100Mbps switch with the
TEG1016D/1024D to resolve the bottleneck issues of server terminal
connectivity, because the speed at each port can be up to 2000Mbps for
full-duplex mode. It’s the best choice for you to upgrade from the normal
10/100Mbps to 1000Mbps. Moreover, its easy setup and no network
management will benefit you a lot. So you can import this Gigabit Switch as
a prime switch to improve the speed between different departments and
servers.
Switch Features
z Compliant to the IEEE802.3, IEEE802.3u, IEEE802.3abIEEE802.x
Ethernet standards, and supports 10/100/1000Mbps transfer mode.
z Supports NWAY auto-negotiation function, auto-detect transfer data rate,

Other manuals for Tenda TEG1016D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda TEG1016D and is the answer not in the manual?

Tenda TEG1016D Specifications

General IconGeneral
MAC address table8000 entries
Store-and-forwardYes
Maximum data transfer rate32 Gbit/s
Supported data transfer rates10/100/1000 Mbps
Wi-FiNo
Size (imperial)11 \
Power requirements100 - 240 V
Networking featuresEthernet, Fast Ethernet, Gigabit Ethernet
Connectivity technologyWired
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Copper ethernet cabling technology1000Base-T, 100Base-TX, 10Base-T
Switch typeUnmanaged
Power connectorDC-in jack
Basic switching RJ-45 Ethernet ports quantity16
CertificationQA
Product colorBlue
Power consumption (typical)25 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Harmonized System (HS) code85176990

Related product manuals