Need help?Do you have a question about the Tenda TEG3224P and is the answer not in the manual?
General| Ports | 24 |
|---|---|
| PoE Ports | 24 |
| PoE | Yes |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table | 8K |
| Weight | 3.5 kg |
| VLAN Support | Yes |
| QoS | Yes |
| Storage Temperature | -40°C to 70°C |
| Power Supply | AC 100-240V, 50/60Hz |
| Management | Web |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC, RoHS |
| Jumbo Frame | 9KB |
Provides a general introduction to the 24-port Smart Gigabit PoE Switch.
Details the physical components of the switch, including front and back panels.
Lists hardware and software specifications of the switch.
Instructions for installing the switch in a standard 19-inch rack.
Instructions for placing the switch on a clean, flat workbench.
Details how to connect the switch to a protective grounding line for safety.
Steps for connecting the switch to an AC power outlet using the provided power cord.
Guides on connecting console, RJ45, and SFP fiber ports to devices.
Final checks to perform after installing the equipment before applying power.
Steps to access the switch's configuration interface via a web browser.
Instructions for accessing the switch using a console port connection.
Procedure for logging into the switch using the Telnet protocol.
Covers system configuration, security, and user management settings.
Details configuration options for switch ports, including setup, mirroring, and statistics.
Explains how to configure Virtual Local Area Networks (VLANs) for network segmentation.
Manages Power over Ethernet settings, including global and port-specific configurations.
Allows configuration of time ranges for scheduling ACLs and other features.
Covers management of device settings like MAC addresses, STP, LLDP, and SNMP.
Configures Quality of Service parameters for prioritizing network traffic.
Provides settings for network security, including attack defense and IP/MAC filtering.
Offers pre-configured settings for specific network environments like hotels or businesses.
Includes system logging, network diagnostics, and troubleshooting tools.
Allows safe exit from the switch's web management interface.
Features for saving, backing up, and restoring switch configurations.
Information on logging into the switch via the Command Line Interface (CLI).
Explains the features and capabilities of the CLI command interface.
Provides a guide to commands for configuring the switch via CLI.
Defines technical terms used throughout the user guide.
Provides contact information for technical assistance and support.
To Next Page
