Tenda TEG3224P User Manual

User Guide
216
TENDA(config-if)# no filter gateway
Note: Disable gateway filter on port
 Display IP+MAC+Port+VLAN binding entry
TENDA# show ipmacbind
Note: Display all IP-MAC-Port-VLAN binding entries
TENDA# show ipmacbind interface gigabitethernet 0/1
Note: Display port filter settings and IP+MAC+Port+VLAN binding entries on a single port
TENDA# show ipmacbind interfaces
Note: Display all port filter settings and IP+MAC+Port+VLAN binding entries
5.3.31 DHCP Relay
 DHCP relay global settings
TENDA(config)# service dhcp
Note: Enable DHCP feature globally
TENDA(config)# no service dhcp
Note: Disable DHCP feature globally
TENDA(config)# service information option82
Note: Enable Option82
TENDA(config)# service information policy replace
Note: Set Option82 strategy to replace
TENDA(config)# service information policy keep
Note: Set Option82 strategy to keep
TENDA(config)# service information policy drop
Note: Set Option82 strategy to drop
TENDA(config)# no service information option82
Note: Disable Option82
 Display DHCP global settings
TENDA# show dhcp service
 VLAN virtual interface configuration
TENDA(config)# interface vlan-interface 2
Note: Enter VLAN virtual interface 2
TENDA(vlan-if)# ip address 2.2.2.2 255.0.0.0

Tenda TEG3224P Specifications

General

Brand	Tenda
Model	TEG3224P
Category	Switch
Language	English