EasyManua.ls Logo

Tenda TEG3224P - Qos Configuration

Tenda TEG3224P
177 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide
204
Note: Set MAC address never to age out
TENDA(config)# mac-address-table aging-time 100
Note: Config MAC age time
TENDA(config)# no mac-address-table aging-time
Note: Restore default MAC age settings
TENDA# show mac-address-table age-time
Note: Display MAC age time
Config static MAC address
TENDA(config)# mac-address-table static 0000.0000.0002 interface gigabitethernet 0/1 vlan 1
Note: Add static MAC address of 0000.0000.0002 to port 1 of VLAN1
TENDA(config)# no mac-address-table static
Note: Delete all static MAC addresses
TENDA(config)# no mac-address-table static 0000.0000.0002 interface gigabitethernet 0/1 vlan 1
Note: Delete a single static MAC address
Display MAC address
TENDA# show mac-address-table
Note: Display all MAC addresses
TENDA# show mac-address-table address 0000.0000.0002
Note: Display a single MAC address (similar to View)
TENDA# show mac-address-table dynamic
Note: Display all dynamic MAC addresses
TENDA# show mac-address-table static
Note: Display all static MAC addresses
TENDA# show mac-address-table vlan 1
Note: Display all MAC addresses in VLAN1
TENDA# show mac-address-table interface gigabitethernet 0/5
Note: Display MAC address (es) on a certain port
Clear MAC address table
TENDA# clear mac-address-table
Note: Delete all dynamic MAC addresses
5.3.20 QoS Configuration
QoS Priority type select
TENDA(config)# QoS trust cos
Note: Set Priority Type to CoS

Table of Contents

Related product manuals